524,266 active members*
2,482 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Need Okuma software
Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Sep 2008
    Posts
    137

    Need Okuma software

    Dear all

    I have Okuma MDB with OSP-7000M, the battery was flat, so I need the software for reinstall to my machine, I'm willing to buy it

    Thanks

  2. #2
    Registered
    Join Date
    Apr 2009
    Posts
    1043

    Re: Need Okuma software

    All machines come with software in the electrical cabinet. If yours is gone, then you will need to get a new set from Okuma through your local distributor. Software is machine specific by serial number although if you can find the same machine with the same hardware spec, their software will work in a pinch.

    Best regards,
    Experience is what you get just after you needed it.

  3. #3
    Member
    Join Date
    Sep 2008
    Posts
    137

    Re: Need Okuma software

    Thanks you very much . But I'm still want to find the software not from Okuma local distributor

  4. #4
    Registered
    Join Date
    Apr 2009
    Posts
    1043

    Re: Need Okuma software

    So it’s software is gone from the electrical cabinet? There are only a handful of those machines around and most are built with very specific options. That control is 4 generations old so your odds aren’t too good.

    Just so you know...
    Experience is what you get just after you needed it.

  5. #5
    Member
    Join Date
    Jun 2015
    Posts
    3127

    Re: Need Okuma software

    I'm still want to find the software not from Okuma local distributor
    hy, with a bit of luck, you may succed ... but i am reserved about chances

    like mr wizard said, software is unique for each machine; even on modern identical machines, you can not install same software pack

    i am not sure if the software also includes machine parameters, as i once heared that someone failed to install the osp, so it was needed that a japanese would came and re-initialize his parameters

    those software are pretty well packed ( okuma protection ), making it hard for a mere mortal to make a software compatibile across different machines

    in the end, you may still need to contact an okuma agent / kindly
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  6. #6
    Member
    Join Date
    Jun 2020
    Posts
    5

    Re: Need Okuma software

    HELLOW GUYS ,

    SORRY FOR MY question ,HOW CAN I MAKE NEW POST IN THIS FORUM

  7. #7
    Registered
    Join Date
    Apr 2009
    Posts
    1043

    Re: Need Okuma software

    At the top hit the POST NEW THREAD button.
    Experience is what you get just after you needed it.

Similar Threads

  1. Okuma lb 15 osp 5000L-G Software
    By xal3r in forum Okuma
    Replies: 8
    Last Post: 04-05-2019, 11:18 AM
  2. Replies: 0
    Last Post: 01-07-2019, 04:49 AM
  3. OKUMA MC-500H Software!!
    By bbarber80 in forum Okuma
    Replies: 4
    Last Post: 06-05-2012, 01:00 PM
  4. Okuma CNC OSP 500L-G --- Cam Software
    By rajappa in forum Okuma
    Replies: 0
    Last Post: 06-18-2008, 01:21 PM
  5. New Software for Okuma
    By psevin in forum News Announcements
    Replies: 0
    Last Post: 08-15-2006, 04:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •