545,767 active members*
1,834 visitors online*
Register for free
Login
IndustryArena Forum > Community Club House > International / Regional Forums > Australia, New Zealand Club House > NEWBIE LOOKING FOR CNC ROUTER FOR CUTTING ALUMINIUM BOX SECTION
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Jul 2021
    Posts
    2

    NEWBIE LOOKING FOR CNC ROUTER FOR CUTTING ALUMINIUM BOX SECTION

    Hey everyone, first time posting.
    Really new to the world of CNC and automation.

    We are an aluminium window and door fabricator, looking to increase the tech in the workshop.

    Main objective is to acquire a CNC machine to router our locking mechanisms into our aluminium window/door stiles. We are based in Sydney, Australia.

    The product being fed into the machine will be an aluminium box section, length will vary between 1.2m - 2.4m, maximum 3m, by 60mm high and 45mm wide.

    The actual location of the cut-out to be made will vary (in the centre of the length/ends of the length), cut-outs to vary also (approx. 80mm - 150mm in length and approx 20mm wide).


    Aluminium will be approx 2.5mm thick.

    See attachements for examples of finish.

    Output would be approx. 20 units a week.

    Any assitance/advice from any of the friendly experts here will be greatly appreciated!
    Attached Thumbnails Attached Thumbnails cnc1.jpg   cnc2.jpg   cnc3.jpg  

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •