529,726 active members*
3,650 visitors online*
Register for free
IndustryArena Forum > MetalWorking Machines > Benchtop Machines > Optimum MH-28V CNC Conversion with 20mm linear rails
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2012

    Optimum MH-28V CNC Conversion with 20mm linear rails

    I have just finished my conversion on a Optimum MH-28V fitted with

    Nemo 34 stepper motors, 20mm linear rails with Hiwin Linear bearings, 20mm ball screws, coolant tank and enclosure shown in the photos attached.

    Attachment 449174Attachment 449176Attachment 449176Attachment 449178Attachment 449178Attachment 449180Attachment 449182

  2. #2
    Join Date
    Aug 2006

    Re: Optimum MH-28V CNC Conversion with 20mm linear rails

    looks good. I really like your re-use of the existing saddle piece with the "leveling plate". Pretty clever right there.

Similar Threads

  1. Standard linear motion conversion to linear rails.
    By bobmagnuson in forum CNC Router Parts
    Replies: 10
    Last Post: 01-06-2019, 08:33 AM
  2. G0704 CNC Conversion - Linear Rails, Servos, Ballscrews
    By tjschweizer in forum Benchtop Machines
    Replies: 79
    Last Post: 12-19-2015, 02:19 PM
  3. Replies: 5
    Last Post: 09-16-2013, 02:03 AM
  4. Small chinese lathe ways, or linear rails for cnc conversion, accuracy difference?
    By Apples in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 12-11-2011, 04:44 AM
  5. 16mm vs. 20mm supported linear rails...
    By WilliamD in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 12-20-2008, 12:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts