531,690 active members*
3,853 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > OSP 100 Battery alarm 4035
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Sep 2006
    Posts
    202

    OSP 100 Battery alarm 4035

    Hi,

    Machine Macturn350 OSP100

    4035 ALARM- D Memory board/battery change 2
    2) A a certain period has passed since the software was initialised installed

    Has anyone instructions for this? Is there date in parameters which should be change after battery replace?

    Thanks,

    GB

  2. #2
    Registered
    Join Date
    Apr 2009
    Posts
    1101

    Re: OSP 100 Battery alarm 4035

    The battery has a set timer on it that will go off weather the bat is going dead or not. You can go to the battery page in your parameters and advance it a bit to get rid of the alarm temporarily but it’s best to replace it and set the date ahead by the several years as recommended. Was it seven? I forget...maybe my battery is getting weak... ;-)

    You will probably have to unhide the parameter page using display change.



    Best regards,
    Experience is what you get just after you needed it.

  3. #3
    Registered
    Join Date
    Sep 2006
    Posts
    202

    Re: OSP 100 Battery alarm 4035

    I have not found battery info page on OSP100 ? Which parameter page is it ?
    Thanks,
    GB

  4. #4
    Member
    Join Date
    Aug 2011
    Posts
    266

    Re: OSP 100 Battery alarm 4035

    What is the OSP100?

    U100 , E100 or P100, which?
    "Imagination is more important than knowledge."

  5. #5
    Registered
    Join Date
    Sep 2006
    Posts
    202

    Re: OSP 100 Battery alarm 4035

    it's U100L
    Model year:2003

  6. #6
    Registered
    Join Date
    Sep 2006
    Posts
    202

    Re: OSP 100 Battery alarm 4035

    Designer of this battery system has drinked sake. A lot.
    I found instructions here:
    https://www.practicalmachinist.com/v...cedure-277828/
    Biggest problem was to found 3,5 inch floppy...
    Good luck to anyone with this problem.

Similar Threads

  1. Alarm 4035
    By dinoeko9 in forum Okuma
    Replies: 0
    Last Post: 10-31-2017, 01:12 AM
  2. 2100 NCK ALARM 810D - NEED TO CHANGE BATTERY - WHERE IS THE BATTERY LOCATED?
    By scottbryce in forum SIEMENS Sinumerik CNC controls
    Replies: 1
    Last Post: 06-11-2017, 05:50 PM
  3. Replies: 5
    Last Post: 03-07-2017, 06:15 AM
  4. Memory board/battery alarm 4035
    By lmbma in forum Okuma
    Replies: 4
    Last Post: 06-17-2014, 03:39 PM
  5. 4035 Alarm-D
    By energyzer in forum Okuma
    Replies: 5
    Last Post: 05-16-2012, 12:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •