I have a component that will be milled on the front and back side. Between these there is a fixture that holds the parts. When i want to mill the front part on index B90, which I have created a CPL for. The front part and fixture moves but the back part stays in the same position. What is causing this to happen and how can I solve it?
Thread: Parts not moving
Results 1 to 3 of 3
-
08-08-2024, 12:35 PM #1
- Join Date
- May 2024
- Posts
- 3
Parts not moving
-
08-08-2024, 10:48 PM #2
Member
- Join Date
- Apr 2004
- Posts
- 5796
-
08-09-2024, 09:38 PM #3
Registered
- Join Date
- Dec 2008
- Posts
- 446
Re: Parts not moving
Hi, you should go to "Setup", there you are able to right click on the Stock or partname, there you have Primary/secondary axis.. Try them
Good luck!My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
Reply With QuoteSimilar Threads
-
Pneumatic parts catcher moving too jerky: small parts can shake out
By MadMax in forum Daewoo/DoosanReplies: 4Last Post: 12-15-2009, 12:13 AM -
Breaking X4 in parts for moving
By zaebis in forum Syil ProductsReplies: 2Last Post: 05-17-2009, 05:09 AM -
Alibre Design Express Question - Moving parts
By 11bravo in forum Uncategorised CAD DiscussionReplies: 18Last Post: 04-12-2007, 05:28 AM -
Moving parts
By Alan B in forum BobCad-CamReplies: 4Last Post: 09-01-2006, 08:32 AM
Tags for this Thread
Posting Permissions
