549,872 active members*
1,568 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Benchtop Machines > PM25-MV DC Motor controller
Results 1 to 5 of 5
  1. #1

    PM25-MV DC Motor controller

    Hello all! I am well along in the process of converting a PM25-MV to cnc. All that is left is to figure out the spindle control. I am using a acorn board, but I unfortunately do not have the original DC motor controller that came on the mill. I was wondering if there are any off the shelf drivers that would work with the 750W motor, and take a AC input. As well as is able to take the 0-10vdc spindle control from the acorn. I have been having a real tough time trying to find something, and have reached out to PM for a replacement, but would really love something a bit more purpose built vs hacking together the PM25 board with a isolator.


    Thank you very much for your time!

    Jericho

  2. #2
    Registered
    Join Date
    Feb 2018
    Posts
    39

    Re: PM25-MV DC Motor controller

    I have this; Franco on the Centroid forum has a PM25

  3. #3

    Re: PM25-MV DC Motor controller

    Yeah I have seen that one, I don't have the original speed controller so I need to replace that with something as well. I was hoping there was a option that combines both the isolator and dc controller itself!

  4. #4
    Registered
    Join Date
    Feb 2018
    Posts
    39

    Re: PM25-MV DC Motor controller

    Look at the KB-SI-5 which I believe is an isolator that attaches on top of a KB DC motor controller

  5. #5

    Re: PM25-MV DC Motor controller

    Awesome, so its probably the same dual pcb situation as using the stock controller. I sent Galco sales a email, hopefully they can give me a hand!

    Thank you for your help!

Similar Threads

  1. PM25 motor shaft size?
    By patrick31 in forum Benchtop Machines
    Replies: 1
    Last Post: 08-21-2021, 07:12 AM
  2. PM25 controller pictures
    By rschwarz in forum Benchtop Machines
    Replies: 0
    Last Post: 11-14-2020, 09:59 PM
  3. PM25 controller wiring
    By rschwarz in forum Benchtop Machines
    Replies: 0
    Last Post: 11-14-2020, 05:14 AM
  4. Replies: 0
    Last Post: 05-20-2019, 08:49 PM
  5. DC Motor Controller & Driver 2hp ( 2kW ) Treadmill Motor
    By hesham morsy in forum Open Source Controller Boards
    Replies: 0
    Last Post: 01-27-2014, 12:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •