Printable View
Hi,
I am a newby to laser cutters and would like suggestions in choosing a good sensibly priced machine. I live in Scotland and have been looking at HPC, Thunderlaser and machines priced in the region of about £4000. I am looking for at least a 60watt co2 laser which will cut 6mm mdf and possibly 8-10mm acrylic. Has anyone any good recommendations please? Look forward to any advice, thanks.
buy co2 laser tube
buy co2 laser tube
The Mini60 from Thunderlaser.co.uk is far better than the laserscript machines, I have both, the Mini 60 is much higher quality, servo not stepper motor, uses EFR tubes ( most of Reci R&D dept left Reci to go to EFR ) at least 30mmsec 75% power on 3mm ply and is £3995 including a stand
as opposed to my laserscript ( rebadged Rabbit lasers) wont engrave ( keeps jumping teeth on the belt no matter what I do to try and stop it), cuts really slow and dirty, and both my laserscript machines caught fire......as did my mates, I was lucky but his workshop was totalled, plus his insurance wouldnt pay up....the bards are stepped so pieces dont drop through.