Hitachi Seiki Service and Support!!!!!!!!1
Hello all out there lost in the confusion of trying to find support for your Hitachi Seiki machines. I own a CNC Service Company in Wichita Kansas working on all brands of machines, but specializing in Hitachi Seiki. I currently have over 10 gig of info on Hitachi Seiki machines in my database from machine software to procedures and ELECTRICAL MANUALS!!!!! I have years of experience working with these machines, and until June of 04 I worked for Mori Seiki in LA as the Hitachi Seiki specialist. We DO travel, and my hourly rate for shop labor is only $75.00 per hour no matter what state your in. I also do phone support and provide procedures at $45.00 per hour 1 hour min....If you have a Hitachi Seiki machine, other machine models welcome also, call us and we will be happy to help!!! (cureing your headaches is free!!)
You can contact us at 316-744-0549 just ask for Josh, aka Hitachi_man
well be looking forward to hearing from you!!!
how to reset magazine sync
HG 400III with Seicos 10M control. Tool mag is out 5 pots. How can I reset? :cheers:
Pallet Changer Alarm! VM50
Good morning Josh/Hitachi Man,
I have a vm50 with Seikos Alpha10M Control (equiped with dual pallet changer). I'm missing a Programing Manual and Instruction Manual for Optional Functions. Machine seems to be running okay except for swapping pallet. I keep having these alarms when commanding M60.
[2AC7] Transfer Ready Indication Incomplete
[2AD1] Pallet Position Pin in Abnormal
I'm not sure if we had the pallet changer hooked up right because the "APC Ready" Push Button/Light never came on during the whole time and I don't know how to "Origin APC". There's a green LED flashing all the time in APC controller box (bellow/behind the pallet changer).
We're able to MDI the APC door open, Unclamp table (which raised the table up) but unable to dock the table to its place.
I'd like to buy above mentioned Manuals (either printed copies or PDF files) from you and need your help walking us thru solving this problem. I'll have my friend Shane (he helps setting up the machine) give you a call today. We are in Oregon.
Thank you :)
Chi Dang
Ho w can I releasefanuc6mb Z interlock
Dear sir
My machine(Hitachi seiki MG630-V) has micon8 & fanuc6mb system(built in 1982).
I pushed emergence button during ATC working.
After that time I can not do anything because of Z interlock.
How can I release the Z interlock.
If you have micon8 operating manual , Can I get 1 copy?
Thank you
Help on Hitachi seiki va-40
Hi, I am Paul. i just purchased a hitachi seiki va-40, 1980 model. please show me how to get this machine up and running. I spent the whole nite, trying to clear the old numbers from the offset page by pressing CAN , then input, but nothing happen. Also, please show me how to set all the tools in, with the magazine, in order for the machine to regconize all tools. Thanks