memory card error "1010"???
everything going fine, running dnc from cf card. Reposted a program, reinserted card in remote mode, got this alarm. (OIMC control). Tried another card that was fine, same alarm. Restarted machine, reformatted card at PC, same alarm. I cant find "1010" alarm in the book, so I dont really know where to start. any help would be super!
Re: memory card error "1010"???
Hi
Pls send more detail about your USB pen
I have problem on 1010 error now
Re: memory card error "1010"???
Hello spock
Recently I have problem card Error 1010
Fanuc OI MB
So How you fix it.
If you can share tp me will be appreciated.
Thanks
Charlie
Re: memory card error "1010"???
Try formatting the card on the machine
Re: memory card error "1010"???
Hi
I have format with machine.
It complete.
Then Restart.
Card error still there.
If I remove card and try to read data from Card.
Machine say. insert card."
Put card in.
Memory card Error:
Any point for looking?
Thanks
Re: memory card error "1010"???
Re: memory card error "1010"???
do you have a 512mb card or an sram ?
Re: memory card error "1010"???
Hi
I have 64 M and 2GB
Few days ago both work fine.
Re: memory card error "1010"???
Probably your slot then they are about £40 from fanuc
Re: memory card error "1010"???
Because of this reason only, some people use extension cord with the card, rather than directly inserting it in the machine.
Re: memory card error "1010"???
You mean adapter for CF card? ( I have 2 adapter That get same Error )
My Machine Card slot is direct to Main Box of controller.
Easy to replace?
Re: memory card error "1010"???