SX3 1100 watt Motor Controller

KelingInc / Sangmutan 1100 watt BLDC motor and controller.

This post has been removed until the Chinese New Year is over.

So I guess you won't be selling your SX3 motor and controller anytime soon?

Sorry, I will be using it.

Richard

I will sell mine! only about 2 hrs use on it as I upgraded to a 3ph motor as soon as I got the mill

PM me

JTCUSTOMS

ps sorry for the hijack couldnt help myself

Cornbinder,
That is what I should have done. I did it on my lathe and love it. Do you happen to have any pictures of your motor setup? I didn't think there was enough room for a standard 1hp 3p motor on that head.

Richard

I tried looking for the pics on my PC but cant find them, but they are all on my build thread http://www.cnczone.com/forums/bencht...eady_go-4.html.

Post #29 shows the motor mount assembly and I am really enjoying this set-up
there is nothing wrong with the stock motor at all,it had plenty of power.I just wanted mach spindle control and had this laying around so all I had to do was pick up a vfd, which I got a teco sensorless vector model (as seen in other pics in my build log) and it works great.

and the z motor has no problem picking this thing up at 100ipm, I dont push it that hard normally, as that is plenty fast enough for me, I used a pokeys for the operator interface and it works great as well, manual control for simple operations are a breeze now

JTCUSTOMS

Very nice cornbinder !!!

Richard

thank you!
am working on my lathe conversion gathering parts and such, will probably switch that one over to vfd/3ph as well as I have 2 more baldors taking up space

JTCUSTOMS