2 Attachment(s)
Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
:(:(The Old Computer that uses Windows 98 died. then I start to migrate to Windows XP.
First is the Xilog3 I have the backup of complete folders
Seccond the Kvara I have the backup of complete folders
Then I start a clean setup of Windows XP.
I did the configuration to make Windows XP to behave as monoprocessor OS
Install the Drivers
Everything OK til now...
I upload the files to
When I try to Open the BaseMenu this Message Appears.
Attach 1
And Xilog as it shows on Attach 2
Need Help, I try everything... Serial Ports are Working Flawlessly as Serial Cable has been tested with sucess...
I apreciate any help....
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
Verify the COM on the PC and CN.
Verify the file Xilog3.ini if the settings is COM correct and it is working correctly.
4 Attachment(s)
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
I have already check it for many times... it has the same configuration as it was in the old computer.
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
Try modify xilog3.ini.
Put ; in the third line and delete ; of the second line.
Because I remember the baud rate correct is 9600
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
I think I found the error, there's a file, params.cfg, I couldn`t copy that file, it say that file is corrupt...
that's the only thing is different between one folder to other...
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
Try to set to only one cpu core In msconfig( google it )
Other thing could be com cable. Pin 2 and 3 must be switched in win xp.
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
Quote:
Originally Posted by
dmitry83
Try to set to only one cpu core In msconfig( google it )
Other thing could be com cable. Pin 2 and 3 must be switched in win xp.
Thanks for answering my comment gently....
One more question
This Pin setup is made by software or Phisical?
Regards
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
Quote:
Originally Posted by
dmitry83
Phisical. On com cable from plc to pc are 3 wire. 2,3 and 5
Pins are swiched now but still have the same error
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
I`ve made everything that people recommend to do
But still I can not make it work in Windows XP, I wonder if it`s possible to make a Win9X VM, and make it work with standart Virtualized Serial PORT.
I apreciate the help
Kindest Regards
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
Open the KVARA.ini file in the KVARA folder
2 Attachment(s)
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
Quote:
Originally Posted by
piratman1
Open the KVARA.ini file in the KVARA folder
hi, help me
The machine Scm tech 80 show Error 4118 , communication failure with CNC.
Thanks
lamhon
Re: Windows Xp 32bits Xilog3 - Kvara on SCM 80 Tech Plus
Dears,
The same problem, canĀ“t run the Xilog3 on XP or on higher WIN. Betancour have you solved it?