-
Surface Grinder Help
Hey guys,
I've recently picked up a Parker-Majestic surface grinder. I'm trying to mount my wheels, and I seem to have a problem. I don't know how to mount the wheels nor do I think I have the bolts to do it. Can someone walk me through wheel mounting?
Pics Below;
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
Mitchell
-
You need a wheel with a 1 1/4" hole as well as the appropriate adapter. Be sure the adapter has left hand threads. You'll also need the 1/2 inch left hand spindle nut to hold the wheel assembly to the spindle.
Gene
-
-
-
Well it would, but you will lose a lot of the use of the "Y" axis of the grinder. That link is to an extension for a spindle moves the wheel out by 2 3/8".
-
Alright,
Please excuse me as I'm still learning, but would this work on my grinder?
Wheel Hardware - Wheel Accessories | MSCDirect.com
It looks to be not as long at the previously posted.
-
That's what your after. But before you lock yourself into it, know that it is limited to wheels between 1/4" to 1/2" wide. If that works for you go for it.
This one; Wheel Hardware - Wheel Accessories | MSCDirect.com is for wheels 1/2" to 3/4" wide.
Ebay is where I'd go though. Here's a link to two of them for $75; Spoko Grinding Wheel Adaptors 2 | eBay There's many more on there too.
Don't forget you will also need a spindle nut and a spanner wrench.
-
If you haven't had any training on using a surface grinder, sign up for intensive care NOW.
Ian.