Precision Plasma LLC 2x2 Portable Plasma Tables for $1950
If you are looking for a high quality, low cost 2x2 portable table for plasma cutting, Precision Plasma LLC is running a special for 5 units.
We have teamed up with deepgroove1.com to put together a package for $1950 + shipping. Precision Plasma LLC provides the mechanics of the system and deepgroove1.com provides the electronics and motors.
Mechanical:
http://chacich.com/2630/angled50.JPG
The table is shown with a machine torch, but a hand held torch works in the same holder.
See our gantry kit brocure for more information:
http://www.chacich.com/ppllcpdf/ppllcgantry.pdf
Specifications:
- Aluminum gantry with hardened v-rails
- Hardened V-guide wheels
- Zinc plated steel end plates and carriage
- 5" travel Z axis with float and limit switch for "touch and go" plasma cutting.
- 8020 aluminum frame
- 26" x 30" travel
- .001" resolution
- 500IPM rapids
- 50 in/sec/sec accelerations
- 1" clamp collar for torch mounting
Mechanical cost $1350
Electrical:
The electronics package needs to be purchased directly from deepgroove1.com.
http://deepgroove1.com/gecko/gecko%20front.JPG
http://deepgroove1.com/gecko/gecko%20back.JPG
http://deepgroove1.com/gecko/gecko%2...s%20cables.JPG
Includes:
- Aluminum Enclosure
- Geckodrive G540 4 axis driver
- (4) nema 23 stepper motors and cables
- Power supply
- Relay for firing the torch
Electrical Cost $600
Software:
EMC2 can be used to run the table.
Cost $0
Total cost $1950 + shipping
Best Regards,
Ron Chacich
Visit Precisonplasmallc.com for more cnc plasma gantry products.
Note: This system does not include torch height control.
Visit candcnc.com for a compatible low cost torch height control (LCTHC) for only $199.
http://www.candcnc.com/LCTHC.html