In search of software for lab volt festo diactic cnc mill or lathe
I have older labvolt 5400 5500 and 5600
i need software
i do not want to retrofit unless i cant find software
Re: In search of software for lab volt festo diactic cnc mill or lathe
update i found labvolt level 4 and level 5 software...took me about 1 yr but i did it :) on my own...seems noone has the software in this forum unfortunately
Re: In search of software for lab volt festo diactic cnc mill or lathe
hi where and for how much are you getting the software?
depending on how old your machine is you may not be able to use the most recent software send me a private message
Re: In search of software for lab volt festo diactic cnc mill or lathe
Quote:
Originally Posted by
Pmetal25
Hi. I found the firmware for download but not the software. I am interested in purchasing a 5500 lathe that has no computer with it and I saw your post about having firmware loading problems that you figured out. So I would need both software and updated firmware to make it operational? I know you have put a lot of time into this and was wondering if you could assist or lead me in the right direction? I don't know anything about replacing controllers and drivers but could probably figure it out in a few years. I would like to purchase it if I can make it work as it was manufactured. Thank you for your time.
I am also interested if it's possible to make such purchase.
Re: In search of software for lab volt festo diactic cnc mill or lathe
I'm new to cnc. Are you talking about the post processor software? Or the cam software? Can't you use any cam software so long as you have a post processor for your machine? I think that I am missing something.
Re: In search of software for lab volt festo diactic cnc mill or lathe
thank you very much for the recommendations, it's very helpful for me! I am currently concerned about creating my own effective team of guys who will help my firm create a quality product for customers. I understand the fact that a good software company will always strive for a balanced mix of specialists and generalists in the team they form to complete a project. But how can this be achieved in practice? In this I need your help and advice.