Unexpected behavior from Mach3
Hi,
I've used Mach3 with my 6040 cnc machine now for some 5 years with no problem. Same configuration was applied if I changed my computer and installed a new version. Now I've had a crash and again installed mach3. I get unexpected behavior:
1. these problems started when first probe stopped functioning with the green 'touch' indicator all the time staying on (I use mach3 bluescreen). If I disconnected printer cable between computer and cnc machine, touch indicator goes off. If not, it is always on, even though there is no probe contact there!
2. before, I had 'active low' set for Z, now if I set it, machine goes to state as having emergency button on and never gets back to stable state, until I remove check mark for Z active low.
3. X axis moves in opposite direction, even though the config. setting is just as before. When I press left arrow key it goes to right. If I check mark the Dir, then sure it goes left when I press left arrow, but then if I load a program to machine, it will send X to the mirrored direction!
Could you please help me get out of this closed loop? I stopped all I was doing due to this and need urgent help please!
All config. files (please tell me if I have bring any other thing from my mach3 configuration to help find out problem)
http://54.201.16.81/img/cnczone/1/config-pg-1.PNG
http://54.201.16.81/img/cnczone/1/config-pg-2.PNG
http://54.201.16.81/img/cnczone/1/config-pg-3.PNG
http://54.201.16.81/img/cnczone/1/config-pg-4.PNG
http://54.201.16.81/img/cnczone/1/config-pg-5.PNG
http://54.201.16.81/img/cnczone/1/config-pg-6.PNG
http://54.201.16.81/img/cnczone/1/config-pg-7.PNG
http://54.201.16.81/img/cnczone/1/config-pg-8.PNG
http://54.201.16.81/img/cnczone/1/config-pg-9.PNG
http://54.201.16.81/img/cnczone/1/config-pg-10.PNG
http://54.201.16.81/img/cnczone/1/config-pg-11.PNG
http://54.201.16.81/img/cnczone/1/config-pg-12.PNG
http://54.201.16.81/img/cnczone/1/config-pg-13.PNG
http://54.201.16.81/img/cnczone/1/config-pg-14.PNG
http://54.201.16.81/img/cnczone/1/config-pg-15.PNG
