-
Step Stancil
hello friends, tell me please, what technology do you think might be suitable for milling a step stencil, the task is to mill a sheet of stainless steel 0.15 mm thick, and make a pocket 0.02 mm? On Datron m10 pro
we are trying but everything is very sad, we use oil for cooling, mill D6 R0.8, spin 15000, feed 2500...
thank you.
-
Re: Step Stancil
Too fast (aluminium speeds), you are rubbing, not cutting.
Try 65m/min (S3500), & feed of 0.05mm/tooth
Neat oil may also make the cutter slip, not cut
Soluble oil @ 6-10% concentration