-
Hello,
I’ve been working with UG NX4 for a couple of days and I still can’t understand how PP works with NURBS.
When I try to use PP, I get an NC file that doesn’t contain NURBS.
Here’s a part of this file:
N0010 G40 G17 G90 G70
N0020 G91 G28 Z0.0
:0030 T00 M06
N0040 G0 G90 X0.0 Y0.0 S0 M03
N0050 G43 Z0.0 H00
N0060 G1 X.5947 Y.0319 F9.8 M08
N0070 G0 X1.1686 Y-.1012
N0080 M02
I have read that G06.2 start NURBS interpolation mode. Why don’t I have G06.2 then?
Thanks in advance!
Regards
Tsvetoslava
-
I believe the PP didn’t internalize this function.
I mean: function not implemented.
t.
-
Hello,
You have to understand operating mode of our system.
Our PP doesn’t grip for one limited CL file or CLSF. It generates output as NC-program, tool list etc. directly from generated operations. There’s no NURBS output in the CL file.
Why do you want to use Nurbs?
Regards
-
Why do you have 4 positions after the comma? Is it in inch? Or is it postprocessed in linear clauses?
You should better have a direct output, not with linear clauses.
Regards
km