Is there a BOOK on this????
I don't have hours on end to sit and watch videos, is there a book or PDF that I can download and print. It would save me hours.
I have yet to be able to make a part and cut that part using Dolphin, not mad just frustrated. The videos are not very noobish.
edit - I have Part Master 2 cad/cam
Smitty
You might want to start re-doing the documentation.
Ok, your website links this as the support forum. So here is the support I need.
1. I have watched all the Milling Videos.
a. When I go to draw my part, I clink on the dimension tool Horizontal and click the line. I move the line up so I can read the dimension box and it places a value in there for how long the line is.
b. I want to change the length of that line to an exact number, How on God's Green Earth do you do that?
c. How do change any angle, I'm sure it's like the above.
2. I went into the Geo Editor, why would I draw my part in CAD and than re-draw it in the Geo Editor to fix the dimensions from straight XY coordinates. That I don't have a firm grasp of and the reason I bought a CAD package.
3. I'll cover the CAM portion once I have a CAD part.
This may be the best software with the most capabilities on earth, but if the documentation and videos don't cover it well, than it won't matter.
FYI - If DolphinUSA wants to sell more of this software to hobby users and manufacturing people, someone might want to do a better job of documentation. I looked up dimension in all variations on how to do the above.
Sorry for the TONE, I'm almost 20 hours into this and still can't do what I need. Frustration levels are high.
Smitty