How deep do the diamond drag engraving tools engrave to?
Printable View
How deep do the diamond drag engraving tools engrave to?
Not very deep, it is a scratch line. Probably a few thou deep.
Wade
Is it more than .003?Quote:
Originally Posted by wwendorf
It depends on the material. I typically multi-pass drag engrave while changing the Z-depth level to get more spring pressure. I have a hard time getting deeper than 2-3 thou in stainless steel even with multiple passes. Typically the more acute angles of the diamond point will allow for more depth, but the lines generated are VERY fine. I posted a video on youtube some time ago that shows diamond drag in 304 stainless. If you haven't seen it you can check it out.
https://youtu.be/XdswlEzv5Og?list=PL...0yH600MA6CYHk5
Kind of hard to measure how deep it engraves as the point is so fine, but it does do a very nice job. I would probably guess .001-.002 with multiple passes.
When I engrave NFA items to meet the ATF requirements I use the carbide engraver because I can not get a deep enough cut with the drag engraver. I have tried multi pass on stainless and the best I can get is ~.002 . Even engraving aluminum I am not sure I could get deeper that .003 consistently.
Chris