Mastercam post for Fagor 8055M
I am running Mastercam 9, I downloaded a post from emastercam, but I can't post directly to the machine, I have to go through the Fagor dnc program then upload it to the machine into programs. When I start the program I get get an error message: 0002 Improper data. N114 G43 D1 Z50 if I delete the line from the program it then runs through the rest of the program which at the moment seem to be fine, at the end of the program the machine returns to its home position, but likewise if I delete the line from the program it stops at the end without returning to its home position. Can anyone help me modify my post so that I don't have to do this? Or help me post directly to the machine?
1 Attachment(s)
Help editing only one line in post
Quote:
Originally Posted by
cam1
Here's mine, works great.
regards
I have edited this post hoping to get it work with my machine with Fagor 8055 controller, but I have one problem, because I don't know how and where to add a line in a post to get "start clearance" at the beginning of the NC code (see line N160 in 1000.pim). See atachments:
- 1000.pim shows how posted NC should look like
- 1009.pim is the NC which is posted with this modified post
- FAGOR_8055.pst is edited post which still needs editing ;)
So as you noticed I only need a line N160 (in 1000.pim) to be posted with this post. If someone will please help me with this one or at least point me in the right direction! Thank you! :)
Re: Mastercam post for Fagor 8055M
Hi,
I have syntax error on following code for 3 axis milling machine:
G03 X-0.8075 Y0.75 I-0.75 J0.75
the error code is:
CNC:1084 Circular path programmed incorrectly
Anyone having same problem? How should circular interpolation be written?
Thank you, Ivan
Re: Mastercam post for Fagor 8055M
You will need to post the previous line. (the start point of the arc)
Re: Mastercam post for Fagor 8055M
Hi, Cam1. I tried the post you submitted but I get a ( Variable not defined SMC path) error Post line number 1456. I changed the file to be a .PST file. Do I also need a text file with this post?
Any help would be appreciated.
Rager
Re: Mastercam post for Fagor 8055M
i am looking for fagor 8055 m mastercam post prosser
Re: Mastercam post for Fagor 8055M
HI IAM LOOKING FOR A MASTERCAM POST FOR FAGOR
8055 M
Re: Mastercam post for Fagor 8055M
do you guys have anything that would work for ESPRIT?