heidenhain post for tos facing head

Hi guys.

i searched and searched and nothing come up for this one. I would really appreciate if someone here could give me a hint how to get post processor for mastercam x for heidenhain control for facing head ld650, or any turning post processor for heidenhain control.
Thanks in advance..

Ben

Quote:

---

Originally Posted by ben82

Hi guys.

i searched and searched and nothing come up for this one. I would really appreciate if someone here could give me a hint how to get post processor for mastercam x for heidenhain control for facing head ld650, or any turning post processor for heidenhain control.
Thanks in advance..

Ben

---

Try to find from JeffCNC

NO LUCK

Quote:

---

Originally Posted by ben82

NO LUCK

---

In MasterCAM POST Center

I went and did not find anything, May be you clarify how to find right post there

Quote:

---

Originally Posted by ak762

I went and did not find anything, May be you clarify how to find right post there

---

You need sign in first, and then go "download center" - "mastercam download center", you will find "MasterCAM POST Center" on the bottom.

If you have any problem, you can post your question on JeffCNC MasterCAM Forum , I will help you there.

Quote:

---

Originally Posted by ben82

Hi guys.
how to get post processor for mastercam x for heidenhain control for facing head ld650, or any turning post processor for heidenhain control.

---

OK,
I found but I doubt it can help to topic starter. It is mill post ver9

yep i found it too but its a post for milling and i need a turning post.ANYONE??!!