Today I tryed to use 4th axis. But i can't use CS command because I recive #18 error for A axis. I wanna mention is a VM65 ... and when I can't turn the chuck by hand.
Best regards,
Printable View
Today I tryed to use 4th axis. But i can't use CS command because I recive #18 error for A axis. I wanna mention is a VM65 ... and when I can't turn the chuck by hand.
Best regards,
Today I change the cards with X cards, error was the same ... axis A. Also today I disassembled the motor, I cleaned the old oil, check the backlash... everything is great there.
Someone have other suggestion?
Best regards,
Its probably the AMP-0006 unit. There is a fuse on the board you can check.
https://www.fadalcnc.com/index.php/amp-0006.html
Can you tell me where is located, maybe a way to check it.. .machine works perfect without 4th axis.Quote:
Originally Posted by machinehop5
Today I checked just 1010-5 card.. i didn't know I have other unit responsable with my 4th axis.
Not sure which Model Fadal you have....this is photo of a Model4020. The AMP-0006 is mounted on there
Attachment 428422