Printable View
Does anyone know how to install the LRC card for a 2000 AXYZ Millenium? I just bought one and want to make sure I do this right. I just finished building a tower to run the old AXYZ toolpath software (has to run on Windows 95 or 98). I can't get any help from AXYZ because they don't support this setup any lomger and can't quite affore the 6000.00 upgrade to their new controller.
Any help would be appreciated.
Thanks, Don
It is simple plug in and go. Make sure you have the jumpers set for PORT 3. Simply plug it in and make sure that in ToolPath you have selected LRC-3. No drivers needed.
FTP
Thanks! The only slot in my motherboard that it fits in is a bit longer than the card itself. All the pins line up but i'm not sure if it's the right slot. I don't know if the PC is recognizing the card or not. Haven't plugged the machine into the card yet for fear of frying it.Quote:
Originally Posted by ftptorrent
It should be a black ASI slot. Are you sure it is not 2 slots side by side? As long as the slot is black you should be ok.
Yep, It's a long black one. Looks like it's divided into two sections, one after the other but the AXYZ card only fills the first. Is it safe to plug the machine in and go for it?
Yes plug it in and turn on the computer should be good to go.