I was wondering if anyone had relocated the fault lights to the front of your case?
Or used some type of plastic/fiber to redirect the output to the front panel of your box.
-Thanks,
Printable View
I was wondering if anyone had relocated the fault lights to the front of your case?
Or used some type of plastic/fiber to redirect the output to the front panel of your box.
-Thanks,
There is a circuit to hook up an external fault signal on page 5 of the G320 manual. You can find the manual here:
http://geckodrive.com/upload/G320-REV-7-Manual.pdf
Marcus
Thanks for the link.
No I just need to decipher the squiggles.
Ok I guess it pays to read the manual.
Assuming that Mach3 will estop based on the fault error. I don't need the external fault light.
At least not at this point.
I've attached a scanned picture of my understanding of how this should be wired.
If I'm incorrect. Feel free to bash me soundly.
Thanks for the help.
http://www.legendarylands.com/g320_fault.jpg