Bijur oiler

i have a d2990 Bijur oiler to hook up
what is the voltage 110/220
or how to wire it up
the tag is missing on the small motor
the float guage is working
i see 2 wires for float switch
3 wires to motor
blue red white
any thoughts?
harry

I don't have one quite the same as yours but it seems familiar

On my BP Interact the two wires for the float go into your control system and on mine it didn't matter which two went where because it was just a switch

The power can run off 110 OR 220 and it was White, Black and Red on mine


The red was for the 220 and I cut it back and just used the (White and Black) for the 110


Hope that helps

Thanks for the input
the wire color code is red white and blue
i would guess white for neutral
red for 220
am not sure , blue may be 110
i just hate the smell of dollars burning up
I found Bijurs web sight and have an email in to them
again
thanks
harry

i just rec. email from Bijur
20+ year old pump
blue/white, insulate red for 110V
blue /red, insulate white for 220V
not trying to answer my own post but someone else might need to know this
harry