1. Red Dot
Gives position of the laser. So you can check very easily what's your work going on.
--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike
1. Red Dot
Gives position of the laser. So you can check very easily what's your work going on.
--------
Melody
Sales Manager of G.Weike
E-mail: [email protected] [email protected]
Skype: melody.gweike
2. Auto focus
Instead of the focal length ruler.
The laser will have a fixed focal length.
Auto focus working video
"http://http://www.youtube.com/watch?v=7xwz-ADo-lo"]http://http://www.youtube.com/watch?v=7xwz-ADo-lo
3. up-and-down platform
Without it, you can only work on material within 5cm height.
If this equipped on a machine, the up-and-down distance of the platform can be 40cm.
It is very helpful for some thick material work.
Also it is the basic accessory for auto focus, rotary.
up-and-down platform video
"http://www.youtube.com/watch?v=b0PQnEgBjhY&context=C4b720e7ADvjVQa1PpcFNF nMEHVYHHoS-IdzXPpFRZdJ0Ljy3l-Go="]http://www.youtube.com/watch?v=b0PQnEgBjhY&context=C4b720e7ADvjVQa1PpcFNF nMEHVYHHoS-IdzXPpFRZdJ0Ljy3l-Go=
4. Rotary
For cylinder working.
There are two styles of rotaries.
1. New style with clips suitable for bottles & mugs which have bottom
another photo of new style rotary
Red dot photo
Auto focus photo
Up and down platform photo
New Rotary photo
New style Rotary Laser Engraving video
http://www.youtube.com/watch?v=ghsST_A83Ck]gweike laser engraving machine engraver rotary engraving - YouTube
2. We call it old style rotary. But it has its advantages.
It is used for cylinders which have not bottoms as tubes. and also Ok for bottles.
Old rotary photo
5. Water chiller
This one is suggested very much
3000W for small machines smaller than 900mmX600mm
5000W for larger machines
Water chiller takes place of a water pump. It can not only make your machine more beautiful but also can protect & cool the water in the tube so that make the tube's life longer.
water chiller photo