Printable View
Need help on setting up the height of z axis when moving towards to cut other piece. The height from work piece and the tool when moving to another position.
I own a techno cnc router hd series with wiehong nk 105 g2 controller.
Any reply is appreciated
M. Abid
Thank you.
Sent from my GT-N7100 using Tapatalk
MR. Abid,
I use Mastercam X5 at the school I work at. I've found sometimes I have to re set the Z at the point where it will begin the cut.
I stop the program, reset the Z to Zero and restart that program.
I have a CNC that is simple only 2.5 axis.... I do this all the time.
Hopefully this helps you.
Rob
Sent from my iPhone using Tapatalk
Forgot to say that I drop the tool to touch the top if the part.
Sent from my iPhone using Tapatalk