-
Hooking a Probe
Debating beween Xylotek and Hobby CNC and was wondering if anyone has hooked up either a DIY probe or the Desknc probe to a hobbycnc board. I am leaning towards the hobby primarily all of the great feedback but I want to have a probe on my machine for a couple items and thought I would check first. Any info would be great.
-
I just hooked a probe up using my HobbyCNC rig and TurboCNC v 4.01. I used the limit power out of the HobbyCNC board, and pin 11 into TurboCNC for the probe. I've built several home-brew probes...I may have finally got one that will work properly on this last try!
John