Need Post Processor file for Pronest 8 for ESAB Vision 21 controller

Hi,

Does anyone have a post processor file that will work with Pronest for our ESAB vision 51 controller or can advise me here?

Many thanks in advance guys

Could you clarify please? There is an ESAB Vision 2000 and a Vision 51 control. The Vision 2000 control is circa 1996 - 2001 and a Vision 51 is circa 2010+. You best source for a post processor for your software will be Pronest.

Apologies it is the Vision 51 control - our support has elapsed and I was wondering if someone had a CFF file that would be compatible that I could try with this as we haven't used this machine yet with the software - thanks

Quote:

---

Originally Posted by kautostar

Apologies it is the Vision 51 control - our support has elapsed and I was wondering if someone had a CFF file that would be compatible that I could try with this as we haven't used this machine yet with the software - thanks

---

Support has lapsed for the control? The Pronest software?
You may be able to get an EIA converter from ESAB. Failing that, Jim Anderson at Pronest is your go to guy.