MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL
Hello, Gentlemen, I have a problem with the router HAMAI 3VS (FANUC 0-M) and more specifically with the position of the Z axis to the tool change. It seems that the Z axis going down too low or paw tool change is too high because it interferes with the spindle, I'm not sure if also correctly positions the angle of the spindle to be replaced. Can anyone direct me what parameter corresponds to the base point of the Z axis to the tool change, the angle of rotation of the spindle and, if it paws magazine?
Re: MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL
Quote:
Originally Posted by
Optimex
Hello, Gentlemen, I have a problem with the router HAMAI 3VS (FANUC 0-M) and more specifically with the position of the Z axis to the tool change. It seems that the Z axis going down too low or paw tool change is too high because it interferes with the spindle, I'm not sure if also correctly positions the angle of the spindle to be replaced. Can anyone direct me what parameter corresponds to the base point of the Z axis to the tool change, the angle of rotation of the spindle and, if it paws magazine?
Your second position for tool change should be IN G30
parameter is #737
Re: MILLING HAMAI 3VS FANUC 0-M POSITION Z AXIS FROM TO EXCHANGE TOOL
Quote:
Originally Posted by
tmbruno28
Your second position for tool change should be IN G30
parameter is #737
the spindle orientation parameter is 6577