HARDINGE CHNC 1 WIRING SCHEMATIC
Hi All,
Can anyone help? I am looking for a wiring diagram/schematic for a HARDING CHNC 1 with a general numeric control (1980's machine) I think the drawing
number is CC-8220-1? not exactly sure, I have searched everywhere on the brilliant CNCzone website but cannot find anything.
I am willing to pay for these drawings/manuals via Paypal or other, if they can be copied and sent by e-mail or as an attachment even better!
Fingers crossed!
Thanks!
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
Mr. Moonman5,
I have these schematics and would be happy to email them to you. Please send an email to [email protected] and I'll fire them off. I have prettty much every single piece of information about this lathe, so let me know if you need anything else.
Incidentally, I am on the lookout for manuals (originals or PDFs) of the Hardinge Conquest T42 (~1997) - if you know someone with this lathe and could return the favour, I would be immensely grateful.
Torin...
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
Quote:
Originally Posted by
moonman5
Hi Torin,
Thank you for your reply, (only just seen your message) the schematics
Will be a godsend! and very helpful, I cannot thank you enough,
Allen, it's no trouble at all. I have emailed the 8MB PDF file to the email address you gave me. This schematic is nice - not only does it show all the electrical, but details the air and lube systems too.
I printed mine (stretched to the edges) on 11x17 which folds nicely into the back of the parts manual.
Torin...
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
Looks like I replied to the automailer and it bounced. Sent it again, this time to the address you specified in the message.
Torin...
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
I know this is an old post but I am hoping this diagram is still floating around and details the com port. If so could I please please please get a copy.
1 Attachment(s)
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
Quote:
Originally Posted by
oldmanmike
I know this is an old post but I am hoping this diagram is still floating around and details the com port. If so could I please please please get a copy.
No problem, Mike. See the attached PDF. Should have uploaded earlier.
Torin...
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
Hey guys,
I just acquired a chnc1 and too am in need of some more documentation! Is the file that is upload in this thread all the files you have? thanks
Also I plan to part out a lot of the electronics and do a retrofit. if anyone is interested in buying parts from me let me know! I also have the Allen Bradley computer that came with it.
Thanks,
Mike
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
Quote:
Originally Posted by
Abdullah03186
Hi dear ...
I see you really help someone in through this forum
Really I feel very happy to see this.
I am also searching for such wiring diagrams
But I am failed to get such real manuals.
I need hardinge conquest t65 schematic or wiring manual.
Now I can hope somebody help me.
Plz help for wiring manual.
Thanks
I'm sorry, but I don't have wiring diagrams for anything other than the machine I own, which is now a Conquest T42. The CHNC1 and any paper wiring diagrams I had for it are now with its new owner.
As for your T65, I suggest you call Hardinge with your Machine information (especially serial number) and they will be able to provide the wiring diagrams you need.
Torin...
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
Sorry for reviving an old thread but does anyone by chance have schematics for the CHNC 2?
I have not been able to find any and Hardinge won't give them up/don't have them anymore?
Thank you,
Caleb
Re: HARDINGE CHNC 1 WIRING SCHEMATIC
Hello, Do you have an operation manual for CHNC with a Fanuc GN6T control ?