Printable View
Hi, I'm interested in a Chinese 1200x800 80W Laser cutter/engraver and after reading a lot of thread in this forum i've learned two things:
1-It's better if you buy a laser from a manufacturer
2-It's better if you chose a manufacturer with a good post-sales service
Now here is my question:
Who/Where can I buy it?I've read about wklaser, hkxy, G. Weike but they seems all the same, what I've to do?Please help me
nobody know a good distributor/manufacturer? :(
I've talked with Wklaser, it seem really really good :)
Hi Paox,
I can recommend you. I ever buy chinese laser at 60 watts of Redsail.
it's low prices but high quality. Power 60 watts is suitable for both engraver
and cutter. If you use 80 watts, It's suitable for only cutter.( cutter is good
but engrave is bad) If power is higher. beam of laser is bigger. 80 watts can
cut only non-metal. It can not cut metal. Why do you choose at 80 watts ?
I think that 60W are to few to cut 10mm acrylic (or 20mm) i doesn't need to engrave photos but just simple font so i'm not interested in good engraving quality.
I doesn't know redsail products but I've seen a WKlaser and seem really good.
Did you had problems with RedSail?What about the post-sale service?
Service is good. If you have any problems with laser. He can help you.
Please contact : [email protected]. Redsail is manufacturer , not
distributer. I am appreciated Sara. She is good service if I have any
problems with my laser. She will find detail and help me immediately.
Hi Paiox, I want to know what job that you have to choose at 80 watts? You cut only acrylic or not.
This outfit is great- sales @ artworldcn.com I got tubes and the quality so far is very good!
Hi Paul,
I am glad to see your post. Did you remember for your post? at
http://www.cnczone.com/forums/showthread.php?t=23815. I am interested
in Linkmotion software. You want to switch from DSP software to use this software. Can you advise me? Pls tell your e-mail to contact easily.
Regards,
Ton
Hi Paul,
I am glad to see your post. Did you remember for your post? at
http://www.cnczone.com/forums/showthread.php?t=23815. I am interested
in Linkmotion software. I want to switch from DSP software to use this software. Can you advise me? Pls tell your e-mail to contact easily.
Regards,
Ton
We are in the market of serigraphy but we want to introduce the laser in our job to expand our market.
I think i will contact both Redsail and WKlaser, and evaluate the services that they offer, Redsail seem a company with more experience and a better site, but i think that the prices of wklaser are the lowest for this kind of machine. Right?
It's really difficult to do the right choose
If you buy it already. Please share idea to increase experience for laser machine at my e-mail :[email protected]
Good luck PaioX
Ton
Hi Paul,Quote:
This outfit is great- sales @ artworldcn.com I got tubes and the quality so far is very good!
Care to share your experiences regarding artworldcn? How was the ordering and delivery? Silly question, however... is this the same outfit as the tube you showed malfunctioning? Did you purchase your power supply at artworldcn as well as the tube?
Sorry...lots of questions, but I have put my one man shop up for sale to generate funds to acquire a laser cutting machine.
Thanks,
jmg
Who did ever use link motion? Please advise.
Who ever use link motion? Please advise.
Who ever use link motion? Please advise.
Paul,
We are a Chinese manufacturer and opend our US office since last Dec, maybe we can talk for a couple of minutes and you also can go to our web site http://www.hxlaser.com to get more information to get my contact information or dowonload our demo video from http://www.rabbitlaser.com/DemoVideo
We are redsail distributors in Mexico, but however we fine tune / modify the machines to best performance, YOU CAN engrave with 80 watt machine, you can even engrave in a paper sheet with a 100watt machine, this becouse we power calibrate the machines to alow full control over power, so you can cut and engrave with ease on most materials, also we back up our sales with 24hr tech support, and 2 year warranty in house ( not from china factory )Quote:
Originally Posted by samakthachai
feel free to contact us
Edward
[email protected]
+011 521-331-116-6056
www.laserymas.com
Hey Frank , I've been trying to download your videos but nothing happen. Is there any other way to see your mavhines working??
Thanks
Luis
I've got a feel, a real feel.
The low price is the most important thing!
The post-sale service is another issue after the machine is sold.
I believe that the one with the money is the boss.
Anybody agree?
Unless you have a great knoledge on the machine you buy, the after-sale service IS the most important, then pricing, or you will end with a very cheap paper wheight !!!!Quote:
Originally Posted by kyfds