Printable View
We just recently took delivery of a citizen cincom L20 with a Mitsubishi control. This is the first swiss we have that isn't a tsugami. My operators/tech guys are asking for a load meter screen to monitor spindle and axis loads to be able to know what their tooling is doing. I can not for the life of me find where or how to activate those features for this machine. On Fanuc controllers they are right there......Any help is greatly appreciated!
hy, i have observed tool life for long setups, that would be there at least for a few months, and i worked with citizens and bigger lathes
i really have no clue if there is monitoring on citizen, simply because we would inspect the part, and decide if it was required to change a tool ... if you wish, consider using powerfull, big magnifying glass
our operator was experienced, being able to hear the machine :) and we used quality carbide
i just searched through the manuals, so please find attached pdf, about displaying the meters
i don't know how to use monitoring inside the program
please, how do you use monitoring on fanuc ? do you implement it inside the program ? i know that is not related to your question, but i wish to know about fanuc's monitoring capabilities / kindly :)Quote:
On Fanuc controllers they are right there
on fanuc controls you can see the loads for the spindle and for the axis, generally in the Position screen. You can tell a lot about how a tool is running by watching the torque load required to feed a tool during a cut. On nearly every control I have used, whether it be a fanuc, or fanuc based, like on Fadal, or a Haas, Mitsubishi Meldas 60, Hiedenhien they all have torque load meters for each of the axis. This citizen which has a mits controller doesn't seem to have it readily available. It has never been anything I had to call up in a program, it's part of the machine display which is controlled by the PLC logic I suppose.......
i believe that it is under the maintenance hard key
then scroll thru the soft keys until you get to sp load soft key
it will be a digital meter about 4-5 rows down
Citizen L20 machine Mitsubishi control I am need post processer SolidcamQuote:
Originally Posted by jeepnxj96
You need to ask that in the Solidcam Forum.Quote:
Originally Posted by Atulsharma