Anybody using mastercam with the SL15

I'm an old user of Mastercam (stuck on X8), no more new software or maintenance. I will probably close the shop in a couple of years.

Every post-processor for lathe output G code that Pathpilot does not recognize.

I would like to remove the G00 before the tool change. Replace G00 T0101 with only T0101

Output G30 for tool change position

Remove G50 for maximum spindle RPM and replace with D, something G96 S600 D2000 M03

I would gladly pay someone to edit a Post-Processor

Thanks

I will post this in the Mastercam forum