Tool magazine (Automatic selection of the rotation direction)
Dears,
I have Kronos208(machining centre) made by CMT with SINUMERIK 810T. The tool magazine is automatically selecting the fastest direction to rotate going to the next tool. When the rotation is anticlockwise the magazine is not locking and due to my difficulty to fix it, I like to change the parameter-s in order to make it rotating always clockwise.
Re: Tool magazine (Automatic selection of the rotation direction)
Quote:
Originally Posted by
Louis1967
Dears,
I have Kronos208(machining centre) made by CMT with SINUMERIK 810T. The tool magazine is automatically selecting the fastest direction to rotate going to the next tool. When the rotation is anticlockwise the magazine is not locking and due to my difficulty to fix it, I like to change the parameter-s in order to make it rotating always clockwise.
It should be no such parameter to do that.
Better fix the tool magazine.
Re: Tool magazine (Automatic selection of the rotation direction)
Thanks a lot for your reply. Please confirm whether you have knowledge of my controller SINUMERIK 810T