KM3P will not move X+

Hello All!!

Just fired up my "new" KM3P and found a problem. All directions of movement work just fine except X+ direction. I moved it around in Y and Z in both directions but X will only move in the - direction. When homing the machine, Z axis homes fine but because X will not move in the + direction I get a "marker not found on X" error. Any suggestions on what it could be? Could there be a problem with the X+ limit switch that would cause that?

Any suggestions would be appreciated!!

Thanks
Allen

Got it figured out... Bad board!!

Thanks
Allen

I can fix it :)

Buddy
www.amtsinc.com