If you look on the side of the control cabinet there will be a allen head with a red tag. That tag will have a few lines on it with a green/yellow wire connected to it. That is the ground for the machine.
John
Printable View
If you look on the side of the control cabinet there will be a allen head with a red tag. That tag will have a few lines on it with a green/yellow wire connected to it. That is the ground for the machine.
John
Tim,
Send me a picture of the other side of the cabinet. I didn't see any grounds in the picture you posted.
John
Tim,
PM me your email address. I will send you pictures of the inside of my cabinets.
John
Tim,
Just emailed you pictures. Sorry for the late response. I ran to the shop to get a few good pics. Hope they help. We will get it figured out.
John
Hi John, I tried to PM you but I am getting this "Jzarski has exceeded their stored private messages quota and cannot accept further messages until they clear some space."
did you get this figured out Tony?
http://uploads.tapatalk-cdn.com/2016...59c84b5a22.jpg
Lower left hand corner, you can see the ground wire.
Sent from my SPH-L710 using Tapatalk
http://uploads.tapatalk-cdn.com/2016...7233a7e9fb.jpg
Sent from my SPH-L710 using Tapatalk
Thanks for sharing cnc router details.