Looking for a Partmaker post for a M2-32 Citizen! Any help would be great!
Printable View
Looking for a Partmaker post for a M2-32 Citizen! Any help would be great!
Hola, recien me sumo al blog...estamos en cuarentena por el Covid-19 y no tengo el postprocesador que usamos en un FAGOR 8055. Ni bien pueda sumo..
Gracias por el aporte de todos...
vero visi post ?
hello i have the post
if still interested
please sent mail to [email protected]
on moday when in the office i can set you
Hello
I need post p for Simens 808d Controller
please help me
S O S
thank you so much
Hello everyone!
I'm searching for post for Hurco vmx42 srti with winmax (3+2) for Siemens NX.
Though, i know that i can try to make it myself with post generator, and it seems to work, but, for the winmax, it is necessary to add G68.2 X Y Z A B C (virtual axis rotate) after physical rotate (exmpl: B-90 C250). I don't really know where to start to add this.
Any help is welcome :)
If it is more convenient by mail you can write to me here: [email protected]
Hello, can you send me all your processer? [email protected]
hello i really need siemens 808d turning post processor for solidcam send me files at: [email protected]
Hello,
I recently took over operation of a 2003 Biesse Rover B 4.40 FT CNC Router. We were using Enroute 3 for the longest time, and now I would like to upgrade to Enroute 6. Is there a post for that? Is Enroute 6 the best CAD/CAM to be using on such an old machine? We mostly cut out 2D paths, nothing fancy, although I would love to have 3D capabilities. Thank you for any help or tips!!
Hi, im looking for solidcam post processoor for FAMUP MMV 20, thank you
hi there,
what program do i need to view the .pst file
i want to have a look at what the post file has in there.
thanks