4 Attachment(s)
Share your 3D Carving files, Parts or Art
Hello All,
The guys on the metalworking side of the zone have had a FREE resources thread running for some time now. Think that it's only right that woodworkers have a similar thread specifically dedicated to our area of interest.
So.... if you have any FREE dedcated woodworking content you don't mind sharing, please feel free to add it to this thread. This will probably need to be in the form of links. .STLs can be a bit large for the allowed file sizes.
To get the ball rolling there are 25 FREE .STL's in the download area at http://cnc4free.org. There is also some .DXF content, but I think woodworkers will be more interested in 3D type carving content.
I've posted some images below.
TTFN
Danny
That's the whole point....
Quote:
Originally Posted by
pike88
Their 3D models are around $25 each
Hi there,
I think you've demonstrated the whole point of this thread very clearly....
It's well known that you can BUY 3D Carving type clipart. $25 per file might seem very reasonable if it's paying work or you are well established in business . For the CNC newbie, hobbyist or small business these costs can be more difficult to justify.
That's why I started this thread... FREE 3D carving resources are few and far between... Evidenced by the few links to actual content.... I had hoped there would be more posts linking to FREE content...
I think the costs of the software people apply to this task discourages FREE distribution. This is not an issue in my case as all the 3D carving content distributed at http://cnc4free.org is created using FREE tools.
Links to FREE content is the purpose of this thread.
TTFN
Danny
Thanks for kind word etc...
Just to say thanks to Bradt and ghebard for the kind words...
If you can post links to content without breaching copyright then please do.. the more FREE stuff the merrier.. :)
TTFN
Danny
4 Attachment(s)
November Updates - ONLINE
To anyone interested really...
November updates are now online at http://cnc4free.org
Tried to add example Images but for some reason board is not accepting them at the moment... will try and add later
Links page also updated
TTFN
Danny
4 Attachment(s)
December Updates - ONLINE
To anyone interested really...
December updates are now online at http://cnc4free.org
Also would like to say big thanks to all those who have supported the site and its aims in 2009, as well as the increasing number of regular visitors...
Hope you get what you want from Santa... Merrry Xmas and Happy new year to all
Links page will be updated over the next few days if I get chance.. been busy, busy busy in the run up to Xmas...
TTFN
Danny