GibbsCam Post Processor Needed
Hi
Can anyone help me with a Post processor file (.pst, not PostHaste) for a Femco Durga 25 with fanuc 0TC. A generic 0T would be great, however if I could find a processor custom to the 24 station turret That would be wonderful. The ID turret needs to be on T0100 to index the OD turret and the OD turret needs to be on T2100 to index the ID Turret. If anyone can help, I would greatly appreciate it.
Thanks
CCAJohn
Re: GibbsCam Post Processor Needed
does anyone have gibbs postprocessors for lathes - haas, doosan and okuma?
Re: GibbsCam Post Processor Needed
Hello,
I need Fanuc OI posprocessor *.pst file. Can you help me
Thanks
Re: GibbsCam Post Processor Needed
Re: GibbsCam Post Processor Needed
Hello.
Does anyone have post for HaasVF5 with trunnion TR310. ( A and C axis, simulateinious. )
Erik.
Re: GibbsCam Post Processor Needed
Hello,
Please help, i need post processor on turning centre DOOSAN PUMA GT2600M(Gibbscam)
Thank you very much to soon results
Re: GibbsCam Post Processor Needed
I looking for heidenhain 5 axis post do you have any
Re: GibbsCam Post Processor Needed
Looking for a post for oi tf lathe
Re: GibbsCam Post Processor Needed
I need on for a new post for haas vf and size 3 axis mill and one with 4 or 5 axis. My old one i use to use in gibbs 2010 does not like it when I try to post volumill operation in my 2017 version.
Re: GibbsCam Post Processor Needed
Yes I have post for haas A/C 5 ax PM me with your email
1 Attachment(s)
Re: GibbsCam Post Processor Needed
Quote:
Originally Posted by
jjones3376
I need on for a new post for haas vf and size 3 axis mill and one with 4 or 5 axis. My old one i use to use in gibbs 2010 does not like it when I try to post volumill operation in my 2017 version.
HAAS Post 3-axis and 4-axis
Re: GibbsCam Post Processor Needed
Quote:
Originally Posted by
fsumkin
HAAS Post 3-axis and 4-axis
I am looking for one for a star sr20 IV type b. any star will work if you have one.I can edit the output to make it work
Re: GibbsCam Post Processor Needed
Hi all can someone help me with a post for Emco Hyperturn with fanuc 31i controller. Machine has 2 spindles and 2 turrets
Re: GibbsCam Post Processor Needed
Hello
i need post Gibbscam for turning Schaublin 125 CNN+Caxis (fanuc 0i+)
[email protected]
Thank
Re: GibbsCam Post Processor Needed
Re: GibbsCam Post Processor Needed
Hello, I write from Spain. Please I need the Gibbscam Post for Fagor 8055 4 axis.
I would be eternally grateful.
Thank you