1 Attachment(s)
RFQ for brass parts. 16ea +/- o pcs.
Looking for someone in the Los Angeles, CA area interested in doing 16 of these parts. See attached. Material is brass. Can be made from 1-3/8" bar stock. Dimensions are not super tight, just .xxx on diameters. Part is cosmetic so a decent finish is required for subsequent polishing and plating.
I can't economically get the 1/16" radii on my 2-D mill on the tapers.
CAD model on request if needed.
Re: RFQ for brass parts. 16ea +/- o pcs.
Sir could you post your contact email or enable private messaging - did the file attach?
Thank you,
Re: RFQ for brass parts. 16ea +/- o pcs.
We are near the other LA, Lower Alabama. If you could post the file we can send you a quote.
[email protected]
Re: RFQ for brass parts. 16ea +/- o pcs.
We could do this if you consider the Chinese manufacturer. 2fprototypes focus on rapid prototype, mold, and OEM manufacturing & engineering for 12 years.
web: www.2fprototypes.com
Email: [email protected]
Thanks,
2fprototypes
Re: RFQ for brass parts. 16ea +/- o pcs.
Looks like nothing attached.