Fadal Control Support DC to AC Servos

Is it possible to replace the Glentek / AMP DC servos and drives with third party AC servos and still use the Fadal control?

Fadal used AMC amps with Baldor motors also. If your motors jived with your amps and your amps jived with the axis controller cards then I guess you could do it. Glentek stuff getting hard to get? Why do you want to do that?

You sure can BUT the DC motors are very long and have very high torque, tach, resolver. You can get AC and DC Fadal motors everywhere.

Quote:

---

Originally Posted by carbidecraters

You sure can BUT the DC motors are very long and have very high torque, tach, resolver. You can get AC and DC Fadal motors everywhere.

---

for convert to ac motor Do i need change u15 and u18 eeproms on controler cards??

Quote:

---

Originally Posted by Mhook

for convert to ac motor Do i need change u15 and u18 eeproms on controler cards??

---

...Hi Mhook,

which type cards to you have? and machine...NUMBERS

Quote:

---

Originally Posted by machinehop5

...Hi Mhook,

which type cards to you have? and machine...NUMBERS

---

hi
my machine :
fadal 4020 1996 dc motor
and 1010-5a cards with
1400-5A cpu

Yes you need AC eproms with the correct software if you have 1010-5 or-6

Quote:

---

Originally Posted by rodney247

Yes you need AC eproms with the correct software if you have 1010-5 or-6

---

thx