Is it possible to use G81/G83 can cycles on 0T? We cannot seem to figure this out. Machine is a Hardinge Conquest lathe. Parameter change?
Printable View
Is it possible to use G81/G83 can cycles on 0T? We cannot seem to figure this out. Machine is a Hardinge Conquest lathe. Parameter change?
On a lathe on Z axis drilling try G74
I run an 0TA control on a SZIM lathe. As lshingleton mentioned, you'll want to use G74.
You may find this handy:
https://www.helmancnc.com/simple-cnc...rilling-cycle/
Parameter 909#3 usually opens this option
Please do not show option paramater in publicQuote:
Originally Posted by guhl
you have to do it in private
Please read the rules
Will not be a next time
cheers
How old is the machine? older machine probably not have it at all.
I'm posting this message as a CNCZone Moderator. :)Quote:
Originally Posted by zavateandu
I, and several other Moderators, are not aware of a rule that says "option parameters" can not be posted in CNCZone threads. We would welcome a link to such a rule, or further explanation.
Oh-ohQuote:
Originally Posted by RaderSidetrack
You cannot fathom the can-of-worms you have just opened
Hope your pockets have lots of cash to pay the suits from FANUC for allowing propriety info to be displayed on a public forum
You may as well say its OK to allow ppl to put up pirate software links for CAD or CAM wannabes
Found the rule....Quote:
Originally Posted by RaderSidetrack
Posted by CNCAdmin as a "Sticky" @ the top of Fanuc forum
https://www.cnczone.com/forums/fanuc/53037-cnc-software-4.html
I suggest the "Moderators" take a refresher at their rules & regs.