-
Switch
I have a home built cnc router that has x y z axis and just added a axis. what i do now is unplug Y motor and plug in A motor, is thier a toggle switch that will do this . all motors are 4 wire so 4 wires in from control box 8 wires out to A and Y. suggestions please.
-
Re: Switch
There are 4 pole double throw switches available If you must do it that way. Be sure to turn the power off before moving the switch so yo u don't blow the driver. I would find a way to add another stepper driver instead.
You could actually get away with a DPDT switch and just the positive leads and leave the negatives connected. Again, power off switching only.
-
Re: Switch
thank you for the help i will try the switch. money very tight at the moment but will use the proper way when i can.
-
Re: Switch
As @rcheli write ALWAYS TURN OFF power before flipping a switch or your tight budget will be blown with the drivers :)