Printable View
My Machine showed this error.
We changed the conections with another board (the machine has 3) and the error changed to the other motor, so we can asume one of the driver boards is bad, can any one help me where I can buy this part? I see at https://www.teknic.com/products/ecli...clipse-drives/ that there are several options, which would be the correct one?
What is the model and part number of you bad drive?
If the drive is faulty the error will stay on the drive.
If the issue is cable or servo motor then the error will move from servo drive to servo drive
If the drive is faulty the error will stay on the drive.
If the issue is cable or servo motor then the error will move from servo drive to servo drive
that is the problem it doesn't say the part number or exact model, my machine is a digital express.
yes we cross conected cables from one drive to the other and the error came out in the other motor
There must be a data tag on the drive somewhere. Multicam never built two machines the same, so you need a data tag on the components.Quote:
Originally Posted by jlazc