Cannot create work cordinates (G54, G55....) E06 NO SPEC ERROR Meldas 64

Hello everybody,
I have cnc milling with meldas 64 control,after loading all the parameters, the machine is working fine but when I'm trying to create the working coordinates (G54, G55....) I get the error: E06 NO SPEC ERROR.
so please if any one know's how to sort this problem out it will be really appreciated
thnx in advance for any help!

Never heard of the brand, but IF Chinese, it is well-known that they do not all support all g-codes.

Cheers
Roger

Im having the same issue. Were you able to work it out. I would like to know.
Cheers Paul

Quote:

---

Originally Posted by Moitsea

Im having the same issue. Were you able to work it out. I would like to know.
Cheers Paul

---

I contacted this cnc service from india: https://www.sjautomations.com
it was a problem of the parameters they helped me to activate them, only the service can activate them. I recommend them with confidence. They did a very good job, on whats app they guided me to activate those parameters.

Quote:

---

Originally Posted by RCaffin

Never heard of the brand, but IF Chinese, it is well-known that they do not all support all g-codes.

Cheers
Roger

---

Mitsubishi Meldas is a quality Machining center

Quote:

---

Originally Posted by Moitsea

Im having the same issue. Were you able to work it out. I would like to know.
Cheers Paul

---

You may find something in this PDF that will solve your problem

Quote:

---

Originally Posted by mactec54

You may find something in this PDF that will solve your problem

---

Thanks, will look into it.

Hi everybody,
I have cnc milling machine (PINNACLE make VMC with M64 CONTROL) after loading all the parameters, the machine is working properly but when I'm trying to create the working coordinates (G54,G55,G56...) I get the error
E06 NO SPEC ERROR. So please if any one know's how to rectify this problem.
With regards
MAHESH