2 Attachment(s)
Maho MH600E transfer program
Hello,
I know a similar topic is already here. I have an older version of the Maho MH600E. I can not send the program to my machine.:tired:
I tried various conneCNC and CademLite programs. When the program is uploaded, the D43 errors are erupted - invalid memory selected, D32- Parity error, D33- word length error, D42- Baudrate and recording is stuck on 21 lines.
I have made a full Handshake cable about 5m long.
I have a machine constant
N771 C1
N772 C3
N773 C30
N775 C1
N776 C600
N777 C600
N796 C0
I do not know the advice anymore
Re: Maho MH600E transfer program
I have the same problem with my maho 600e, it stops the transfer after 6 lines..
Re: Maho MH600E transfer program
Re: Maho MH600E transfer program
I did not understand that ? You gave a handshake cable ?
Can you maybe send the pinout from the cable you use ?
Re: Maho MH600E transfer program