JCUT machines-----from JCUT Mandy

Hi All of my friends

For long time not come to here , miss me right ? haha joking .

Ok , i think many friends not know me and our JCUT machines , but it does not matter, let us start from now

Our company , JINAN JCUT CNC EQUIPMENT CO.,LTD, is professional manufacturer of cnc router machines , 5 axis machines , 4 axis machines , laser machines, laser metal&non-metal machines, fiber laser machines , ATC(automatic tool change) machines, stone metal machines , plasma metal cutters . PCB machines ...., we have been on this line for more than 10 years.

Now , i want to write some questions , if you can tell me the information below , i can easily suggest the best suitable machine for you , thanks in advance

1 , ATC(automatic tool change machine

1) the power of the ATC spindle that you need ?
2) control system that you need , Syntec or LNC or ? if you are not quite sure , for now most customers choose Syntec
3) how many tool change magazine will you choose ? 4 or 6 or 8 or 10 or ?
4) the position of the tool change magazine , linear at back of table or rotary carousel type ?
5) choose delta servo or Japanese servo ?
6) machine choose with vacuum system and dust collector system ?



2, CNC Router machines

1) what about your material , wood or metal or ?
2) the size of your material, the length , width ?
3) how deep do you want to cut your material ?
4) will you choose vacuum system ? dust collector system ? rotary for cylindrical material (if yes tell me the probably diameter and length of your cylindrical material) , water channel(for metal material ) ?( here i should explain , vacuum table and water channel incomptiable, that is if you choose vacuum table, can not choose water channel , just choose one from them )
5) control system mach3 ok for you ?


3, for laser machines

1) what about your material ? acrylic or metal or ?
2) the size of your material , the length ? width ?
3) how deep do you want to cut or engrave your material ?
4) will you choose rise down table, rotary , honeycomb table, auto focus , red dot for position ?


Ok , for today , i will stop here, perhaps you are tired to read too much . thanks for your time , and i will write more later , thanks for your attention

For more details , contact me now , i will reply to you timly or within 24 hours ,thanks again .

Jinan Jcut Cnc Equipment Co.,Ltd
Website: www.jcutcnclaser.com and JCUT Cnc Router,Cutting Plotter,Laser Cutting Machine,Laser Engraving Machine
Export Sales Manager
Mandy Zhang
company email: [email protected]
skype: wdzhangying
phone:0086-531-82374653
mobile&whatsapp:0086-15589961121

bad machines, SCAM company, do not buy from them.