Yaskawa YSC-SGMPH-08-001 suggestions for testing

New to the CNC world. Have converted HF bench mill to CNC and rebuilt a Techno ISEL gantry but those were steppers.
In my travels I picked up a couple Yaskawa YSC-SGMPH-08-001 which appear to be about 1 hp 200V servos with a nice 20mm thru spindle.
Would love to just hook them up to see if they even work before going any further but have no idea where to start. . . .
Is that 200V ac or dc?
Can I use Mach4 and what do I need as far as BOB, controller, PS, etc
Thanks to all that contribute.
cncneon