Cincinnati Arrow error 9036 HELP!
Hello,
Can anyone help with this alarm error 9036 static RAM file system corrupted?
It discription in the manual is (There is a proplem with the C: drive file system possibly due to a battery failure.
These machines are 1994 cincinnati milacron arrow 500 that have a control techniqes interface
The alarm comes up while booting up and can not go further. I have two of these machines that are idenical one is running.
Thanks in advance for your help.
CNC Programming, Inc.
[email protected]
253-514-1047
Re: Cincinnati Arrow error 9036 HELP!
Hi Joe
I am Daniel and i need help in restoring my machine with the error 9036 static ram file system corrupt. How do I use the test mode to check the file system? My email is:
[email protected] and my machine is a CINCINNATI ARROW 500 with CT control FNC-5-005.THANKS IN ADVANCE
Daniel
Re: Cincinnati Arrow error 9036 HELP!
Quote:
Originally Posted by
Stickerman
It's been a couple of years ago, but I had a memory error on my CT control. Maintenance Technologies had me download the files to my PC then copy them back onto the control which fixed the error.
Give Maintenance Technologies a call and they will walk you through it.
www.maint-tech.com
I have the files but how can i download then onto the control? Can you help me please.My email is: [email protected]. Thanks in advance.
The alarms i have are: 9036,9070, and 9044. can yuo give me the cable pinout and tell me the right software for the download of the files please.
Best regards,
Daniel.
Re: Cincinnati Arrow error 9036 HELP!
I had the same problem years ago. Robert Varney help me. The MAIN.PLC file is for the next version of the machine software.
Executive
FNC Executive- standard version
Executive part number C50000
Executive Revision Rev 2.568
System Program
System Program 2.567
PLC
CM Arrow
91202654
P0.11
Robert Varney wrote:
The 9036 alarm is telling you that there is corrupted data in the Main.PLC file. It may be possible to go into test mode and file maintenance call up that file and look through it to find the corruption. It should give you a line number of where the corruption is.
The corruption could be caused by bad batteries in the memory card. With the power on replace the 2 AA batteries.
Robert Varney,
Application Engineer
MAG IAS
Global Services
1780 Worldwide Blvd.
Hebron, Ky 41048
U.S.
tel: 859-534-4748
fax: 859-534-4999
mobile: 513-375-1059
1 Attachment(s)
Re: Cincinnati Arrow error 9036 HELP!
Open the attached main.plc file in windows notepad and compare to what you have. Do not try to copy this file into your control you can only compare it and make manual edits if you need to. The picture of the screen you sent is normal.
Robert Varney,
Application Engineer
MAG IAS
Global Services
1780 Worldwide Blvd.
Hebron, Ky 41048
U.S.
tel: 859-534-4748
fax: 859-534-4999
mobile: 513-375-1059
1 Attachment(s)
Re: Cincinnati Arrow error 9036 HELP!
On your pc put a copy of cnc_com in a directory\folder by itself. Start cnc_com in a dos window\dos prompt. In file maintenance go to copy file. In there you will see copy from and copy to.
Copy from C;main.plc
Copy to I:main.plc
Copy in ASCII.
The RS232a port is drive I and the RS232b port is the J drive.
Robert Varney,
Application Engineer
MAG IAS
Global Services
1780 Worldwide Blvd.
Hebron, Ky 41048
U.S.
tel: 859-534-4748
fax: 859-534-4999
mobile: 513-375-1059
Re: Cincinnati Arrow error 9036 HELP!
On the machine once you call up the file to look at it you can change it when you exit out of the file there should be an option for exit and save.
Robert Varney,
Application Engineer
MAG IAS
Global Services
1780 Worldwide Blvd.
Hebron, Ky 41048
U.S.
tel: 859-534-4748
fax: 859-534-4999
mobile: 513-375-1059
Re: Cincinnati Arrow error 9036 HELP!
Hi Chivo
Thanks for your help. Next week i will try to have a look at the files and i will let you know .
Thaks.
Daniel
Re: Cincinnati Arrow error 9036 HELP!
Daniel,
Did these backups and procedure fix your machine? I'm experiencing the same errors. I have my machines original backups but I'm having trouble communicating with the machine. I purchased the machine with bad batteries and trying to start it up for the first time since owning it.
Thanks,
Tom
2 Attachment(s)
Re: Cincinnati Arrow error 9036 HELP!
hi guys this is the backup of a arrow 500 with CT control anyone know how to load them up to machine?
Re: Cincinnati Arrow error 9036 HELP!
Hi did you fix your problem aventtini
Re: Cincinnati Arrow error 9036 HELP!
Hello,
Can anyone help me with arrow 500 boot ? I'm receiving the error 9036 and 9070, after that goes to the test mode screen and I can't load any files to the machine. Does anyone know how to pass the test mode ?
I appreciate any help my email is [email protected]
Re: Cincinnati Arrow error 9036 HELP!
Quote:
Originally Posted by
aventtini888
hi guys this is the backup of a arrow 500 with CT control anyone know how to load them up to machine?
Same issue. How to load machine? Cable what is pin wiring order?
Re: Cincinnati Arrow error 9036 HELP!
Hi you need computer with old version of windows up to XP
Cable Configuration
9 pin 25 pin
1 8
2 2
3 3
4 6
5 7
6 20
7 5
8 4
9 1
You also require the cnc_com.exe which should be on one of the posts in a zip file. Also patience is very important.
Re: Cincinnati Arrow error 9036 HELP!